Attaching The High Performance Mount

You can attach the SwingTracker to your bat using your High Performance Mount. First you'll need to attach the SwingTracker to the mount, then you'll attach the mount to the bat! Follow along below to get started!

Attach SwingTracker to the Mount

1. Turn the High Performance Mount inside-out
   • Take a look at our video below for steps on how to turn the High Performance Mount inside-out.
2. Place the SwingTracker inside of the High Performance Mount
   • To make sure it's facing the right way, turn your SwingTracker on by tapping it. You should see the green light of the SwingTracker through the top of the High Performance Mount.
     • If your SwingTracker is upside-down (you can't see the green blinking light), the SwingTracker will fail to register swings. 

Attach the Mount to the Bat

1. Place your High Performance Mount on the center of your bat knob. 
   • Reminder: Make sure that you can still see the SwingTracker's green light glowing through the High Performance Mount. 
2. Peel down the edges of your High Performance Mount, so that they wrap around the bat knob. 
3. Take one last look at your High Performance Mount, and make sure that it is firm on your bat knob and centered.